Write the Equilibrium Constant Expression Kc for the Following Reaction. $$

Chapter 13. Fundamental Equilibrium Concepts

13.2 Equilibrium Constants

Learning Objectives

By the end of this section, you will be able to:

• Derive reaction quotients from chemical equations representing homogeneous and heterogeneous reactions
• Calculate values of reaction quotients and equilibrium constants, using concentrations and pressures
• Relate the magnitude of an equilibrium constant to properties of the chemical system

Now that we have a symbol (⇌) to designate reversible reactions, we will need a way to express mathematically how the amounts of reactants and products affect the equilibrium of the system. A general equation for a reversible reaction may be written as follows:

[latex]m\text{A}\;+\;n\text{B}\;{\rightleftharpoons}\;x\text{C}\;+\;y\text{D}[/latex]

We can write the reaction quotient (Q) for this equation. When evaluated using concentrations, it is called Q_c . We use brackets to indicate molar concentrations of reactants and products.

[latex]Q_c = \frac{[\text{C}]^x[\text{D}]^y}{[\text{A}]^m[\text{B}]^n}[/latex]

The reaction quotient is equal to the molar concentrations of the products of the chemical equation (multiplied together) over the reactants (also multiplied together), with each concentration raised to the power of the coefficient of that substance in the balanced chemical equation. For example, the reaction quotient for the reversible reaction [latex]2\text{NO}_2(g)\;{\rightleftharpoons}\;\text{N}_2\text{O}_4(g)[/latex] is given by this expression:

[latex]Q_c = \frac{[\text{N}_2\text{O}_4]}{[\text{NO}_2]^2}[/latex]

Example 1

Writing Reaction Quotient Expressions
Write the expression for the reaction quotient for each of the following reactions:

(a) [latex]3\text{O}_2(g)\;{\rightleftharpoons}\;2\text{O}_3(g)[/latex]

(b) [latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)[/latex]

(c) [latex]4\text{NH}_3(g)\;+\;7\text{O}_2(g)\;{\rightleftharpoons}\;4\text{NO}_2(g)\;+\;6\text{H}_2\text{O}(g)[/latex]

Solution
(a) [latex]Q_c = \frac{[\text{O}_3]^2}{[\text{O}_2]^3}[/latex]

(b) [latex]Q_c = \frac{[\text{NH}_3]^2}{[\text{N}_2][\text{H}_2]^3}[/latex]

(c) [latex]Q_c = \frac{[\text{NO}_2]^4[\text{H}_2\text{O}]^6}{[\text{NH}_3]^4[\text{O}_2]^7}[/latex]

Check Your Learning
Write the expression for the reaction quotient for each of the following reactions:

(a) [latex]2\text{SO}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{SO}_3(g)[/latex]

(b) [latex]\text{C}_4\text{H}_8(g)\;{\rightleftharpoons}\;2\text{C}_2\text{H}_4(g)[/latex]

(c) [latex]2\text{C}_4\text{H}_{10}(g)\;+\;13\text{O}_2(g)\;{\rightleftharpoons}\;8\text{CO}_2(g)\;+\;10\text{H}_2\text{O}(g)[/latex]

Answer:

(a) [latex]Q_c = \frac{[\text{SO}_3]^2}{[\text{SO}_2]^2[\text{O}_2]}[/latex]; (b) [latex]Q_c = \frac{[\text{C}_2\text{H}_4]^2}{[\text{C}_4\text{H}_8]}[/latex]; (c) [latex]Q_c = \frac{[\text{CO}_2]^8[\text{H}_2\text{O}]^{10}}{[\text{C}_4\text{H}_{10}]^2[\text{O}_2]^{13}}[/latex]

The numeric value of Q_c for a given reaction varies; it depends on the concentrations of products and reactants present at the time when Q_c is determined. When pure reactants are mixed, Q_c is initially zero because there are no products present at that point. As the reaction proceeds, the value of Q_c increases as the concentrations of the products increase and the concentrations of the reactants simultaneously decrease (Figure 1). When the reaction reaches equilibrium, the value of the reaction quotient no longer changes because the concentrations no longer change.

Figure 1. (a) The change in the concentrations of reactants and products is depicted as the 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) reaction approaches equilibrium. (b) The change in concentrations of reactants and products is depicted as the reaction 2SO₃(g) ⇌ 2SO₂(g) + O₂(g) approaches equilibrium. (c) The graph shows the change in the value of the reaction quotient as the reaction approaches equilibrium.

When a mixture of reactants and products of a reaction reaches equilibrium at a given temperature, its reaction quotient always has the same value. This value is called the equilibrium constant (K) of the reaction at that temperature. As for the reaction quotient, when evaluated in terms of concentrations, it is noted as K_c .

That a reaction quotient always assumes the same value at equilibrium can be expressed as:

[latex]Q_c\;\text{at\;equilibrium} = K_c = \frac{[\text{C}]^x[\text{D}]^y{\dots}}{[\text{A}]^m[\text{B}]^n{\dots}}[/latex]

This equation is a mathematical statement of the law of mass action: When a reaction has attained equilibrium at a given temperature, the reaction quotient for the reaction always has the same value.

Example 2

Evaluating a Reaction Quotient
Gaseous nitrogen dioxide forms dinitrogen tetroxide according to this equation:

[latex]2\text{NO}_2(g)\;{\rightleftharpoons}\;\text{N}_2\text{O}_4(g)[/latex]

When 0.10 mol NO₂ is added to a 1.0-L flask at 25 °C, the concentration changes so that at equilibrium, [NO₂] = 0.016 M and [N₂O₄] = 0.042 M.

(a) What is the value of the reaction quotient before any reaction occurs?

(b) What is the value of the equilibrium constant for the reaction?

Solution
(a) Before any product is formed, [latex][\text{NO}_2] = \frac{0.10\;\text{mol}}{1.0\;\text{L}} = 0.10\;M[/latex], and [N₂O₄] = 0 M. Thus,

[latex]Q_c = \frac{[\text{N}_2\text{O}_4]}{[\text{NO}_2]^2} = \frac{0}{0.10^2} = 0[/latex]

(b) At equilibrium, the value of the equilibrium constant is equal to the value of the reaction quotient. At equilibrium, [latex]K_c = Q_c = \frac{[\text{N}_2\text{O}_4]}{[\text{NO}_2]^{2}} = \frac{0.042}{0.016^2} = 1.6\;\times\;10^{2}[/latex]. The equilibrium constant is 1.6 × 10².

Note that dimensional analysis would suggest the unit for this K_c value should be M ⁻¹. However, it is common practice to omit units for K_c values computed as described here, since it is the magnitude of an equilibrium constant that relays useful information. As will be discussed later in this module, the rigorous approach to computing equilibrium constants uses dimensionless quantities derived from concentrations instead of actual concentrations, and so K_c values are truly unitless.

Check Your Learning
For the reaction [latex]2\text{SO}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{SO}_3(g)[/latex], the concentrations at equilibrium are [SO₂] = 0.90 M, [O₂] = 0.35 M, and [SO₃] = 1.1 M. What is the value of the equilibrium constant, K_c ?

The magnitude of an equilibrium constant is a measure of the yield of a reaction when it reaches equilibrium. A large value for K_c indicates that equilibrium is attained only after the reactants have been largely converted into products. A small value of K_c —much less than 1—indicates that equilibrium is attained when only a small proportion of the reactants have been converted into products.

Once a value of K_c is known for a reaction, it can be used to predict directional shifts when compared to the value of Q_c . A system that is not at equilibrium will proceed in the direction that establishes equilibrium. The data in Figure 2 illustrate this. When heated to a consistent temperature, 800 °C, different starting mixtures of CO, H₂O, CO₂, and H₂ react to reach compositions adhering to the same equilibrium (the value of Q_c changes until it equals the value of K_c ). This value is 0.640, the equilibrium constant for the reaction under these conditions.

[latex]\text{CO}(g)\;+\;\text{H}_2\text{O}(g)\;{\rightleftharpoons}\;\text{CO}_2(g)\;+\;\text{H}_2(g)\;\;\;\;\;\;\;K_c = 0.640\;\;\;\;\;\;\;\text{T} = 800\;^{\circ}\text{C}[/latex]

It is important to recognize that an equilibrium can be established starting either from reactants or from products, or from a mixture of both. For example, equilibrium was established from Mixture 2 in Figure 2 when the products of the reaction were heated in a closed container. In fact, one technique used to determine whether a reaction is truly at equilibrium is to approach equilibrium starting with reactants in one experiment and starting with products in another. If the same value of the reaction quotient is observed when the concentrations stop changing in both experiments, then we may be certain that the system has reached equilibrium.

Figure 2. Concentrations of three mixtures are shown before and after reaching equilibrium at 800 °C for the so-called water gas shift reaction: CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g).

Example 3

Predicting the Direction of Reaction
Given here are the starting concentrations of reactants and products for three experiments involving this reaction:

[latex]\text{CO}(g)\;+\;\text{H}_2\text{O}(g)\;{\rightleftharpoons}\;\text{CO}_2(g)\;+\;\text{H}_2(g)[/latex]

[latex]K_c = 0.64[/latex]

Determine in which direction the reaction proceeds as it goes to equilibrium in each of the three experiments shown.

Reactants/Products	Experiment 1	Experiment 2	Experiment 3
[CO]i	0.0203 M	0.011 M	0.0094 M
[H2O]i	0.0203 M	0.0011 M	0.0025 M
[CO2]i	0.0040 M	0.037 M	0.0015 M
[H2]i	0.0040 M	0.046 M	0.0076 M
Table 1.

Solution
Experiment 1:

[latex]Q_c = \frac{[\text{CO}_2][\text{H}_2]}{[\text{CO}][\text{H}_2\text{O}]} = \frac{(0.0040)(0.0040)}{(0.0203)(0.0203)} = 0.039[/latex].

Q_c < K_c (0.039 < 0.64)

The reaction will shift to the right.

Experiment 2:

[latex]Q_c = \frac{[\text{CO}_2][\text{H}_2]}{[\text{CO}][\text{H}_2\text{O}]} = \frac{(0.037)(0.046)}{(0.011)(0.0011)} = 1.4\;\times\;10^2[/latex]

Q_c > K_c (140 > 0.64)

The reaction will shift to the left.

Experiment 3:

[latex]Q_c = \frac{[\text{CO}_2][\text{H}_2]}{[\text{CO}][\text{H}_2\text{O}]} = \frac{(0.0015)(0.0076)}{(0.0094)(0.0025)} = 0.48[/latex]

Q_c < K_c (0.48 < 0.64)

The reaction will shift to the right.

Check Your Learning
Calculate the reaction quotient and determine the direction in which each of the following reactions will proceed to reach equilibrium.

(a) A 1.00-L flask containing 0.0500 mol of NO(g), 0.0155 mol of Cl2(g), and 0.500 mol of NOCl:

[latex]2\text{NO}(g)\;+\;\text{Cl}_2(g)\;{\rightleftharpoons}\;2\text{NOCl}(g)\;\;\;\;\;\;\;K_c = 4.6\;\times\;10^4[/latex]

(b) A 5.0-L flask containing 17 g of NH₃, 14 g of N₂, and 12 g of H₂:

[latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)\;\;\;\;\;\;\;K_c = 0.060[/latex]

(c) A 2.00-L flask containing 230 g of SO₃(g):

[latex]2\text{SO}_3(g)\;{\rightleftharpoons}\;2\text{SO}_2(g)\;+\;\text{O}_2(g)\;\;\;\;\;\;\;K_c = 0.230[/latex]

Answer:

(a) Q_c = 6.45 × 10³, shifts right. (b) Q_c = 0.12, shifts left. (c) Q_c = 0, shifts right

In Example 2, it was mentioned that the common practice is to omit units when evaluating reaction quotients and equilibrium constants. It should be pointed out that using concentrations in these computations is a convenient but simplified approach that sometimes leads to results that seemingly conflict with the law of mass action. For example, equilibria involving aqueous ions often exhibit equilibrium constants that vary quite significantly (are not constant) at high solution concentrations. This may be avoided by computing K_c values using the activities of the reactants and products in the equilibrium system instead of their concentrations. The activity of a substance is a measure of its effective concentration under specified conditions. While a detailed discussion of this important quantity is beyond the scope of an introductory text, it is necessary to be aware of a few important aspects:

• Activities are dimensionless (unitless) quantities and are in essence "adjusted" concentrations.
• For relatively dilute solutions, a substance's activity and its molar concentration are roughly equal.
• Activities for pure condensed phases (solids and liquids) are equal to 1.

As a consequence of this last consideration, Q_c and K_c expressions do not contain terms for solids or liquids (being numerically equal to 1, these terms have no effect on the expression's value). Several examples of equilibria yielding such expressions will be encountered in this section.

Homogeneous Equilibria

A homogeneous equilibrium is one in which all of the reactants and products are present in a single solution (by definition, a homogeneous mixture). In this chapter, we will concentrate on the two most common types of homogeneous equilibria: those occurring in liquid-phase solutions and those involving exclusively gaseous species. Reactions between solutes in liquid solutions belong to one type of homogeneous equilibria. The chemical species involved can be molecules, ions, or a mixture of both. Several examples are provided here.

[latex]\text{C}_2\text{H}_2(aq)\;+\;2\text{Br}_2(aq)\;{\rightleftharpoons}\;\text{C}_2\text{H}_2\text{Br}_4(aq)\;\;\;\;\;\;\;K_c = \frac{[\text{C}_2\text{H}_2\text{Br}_4]}{[\text{C}_2\text{H}_2][\text{Br}_2]^2}[/latex]

[latex]\text{I}_2(aq)\;+\;\text{I}^{-}(aq)\;{\rightleftharpoons}\;\text{I}_3^{\;\;-}(aq)\;\;\;\;\;\;\;K_c = \frac{[\text{I}_3^{\;\;-}]}{[\text{I}_2][\text{I}^{-}]}[/latex]

[latex]\text{Hg}_2^{\;\;2+}(aq)\;+\;\text{NO}_3^{\;\;-}(aq)\;+\;3\text{H}_3\text{O}^{+}(aq)\;{\rightleftharpoons}\;2\text{Hg}^{2+}(aq)\;+\;\text{HNO}_2(aq)\;+\;4\text{H}_2\text{O}(l)[/latex]

[latex]K_c = \frac{[\text{Hg}^{2+}]^2[\text{HNO}_2]}{[\text{Hg}_2^{\;\;2+}][\text{NO}_3^{\;\;-}][\text{H}_3\text{O}^{+}]^3}[/latex]

[latex]\text{HF}(aq)\;+\;\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{H}_3\text{O}^{+}(aq)\;+\;\text{F}^{-}(aq)\;\;\;\;\;\;\;K_c = \frac{[\text{H}_3\text{O}^{+}][\text{F}^{-}]}{[\text{HF}]}[/latex]

[latex]\text{NH}_3(aq)\;+\;\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{NH}_4^{\;\;+}(aq)\;+\;\text{OH}^{-}(aq)\;\;\;\;\;\;\;K_c = \frac{[\text{NH}_4^{\;\;+}][\text{OH}^{-}]}{[\text{NH}_3]}[/latex]

In each of these examples, the equilibrium system is an aqueous solution, as denoted by the aq annotations on the solute formulas. Since H₂O(l) is the solvent for these solutions, its concentration does not appear as a term in the K_c expression, as discussed earlier, even though it may also appear as a reactant or product in the chemical equation.

Reactions in which all reactants and products are gases represent a second class of homogeneous equilibria. We use molar concentrations in the following examples, but we will see shortly that partial pressures of the gases may be used as well.

[latex]\begin{array}{r @{{}\rightleftharpoons{}} ll} \text{C}_2\text{H}_6(g) & \text{C}_2\text{H}_4(g)\;+\;\text{H}_2(g) & K_c = \frac{[\text{C}_2\text{H}_4][\text{H}_2]}{[\text{C}_2\text{H}_6]} \\[0.5em] 3\text{O}_2(g) & 2\text{O}_3(g) & K_c = \frac{[\text{O}_3]^2}{[\text{O}_2]^3} \\[0.5em] \text{N}_2(g)\;+\;3\text{H}_2(g) & 2\text{NH}_3(g) & K_c = \frac{[\text{NH}_3]^2}{[\text{N}_2][\text{H}_2]^3} \\[0.5em] \text{C}_3\text{H}_8(g)\;+\;5\text{O}_2(g) & 3\text{CO}_2(g)\;+\;4\text{H}_2\text{O}(g) & K_c = \frac{[\text{CO}_2]^3[\text{H}_2\text{O}]^4}{[\text{C}_3\text{H}_8][\text{O}_2]^5} \end{array}[/latex]

Note that the concentration of H₂O(g) has been included in the last example because water is not the solvent in this gas-phase reaction and its concentration (and activity) changes.

Whenever gases are involved in a reaction, the partial pressure of each gas can be used instead of its concentration in the equation for the reaction quotient because the partial pressure of a gas is directly proportional to its concentration at constant temperature. This relationship can be derived from the ideal gas equation, where M is the molar concentration of gas, [latex]\frac{n}{V}[/latex].

[latex]\begin{array}{r @{{}={}} l} PV & nRT \\[0.5em] P & (\frac{n}{V})\;RT \\[0.5em] & MRT \end{array}[/latex]

Thus, at constant temperature, the pressure of a gas is directly proportional to its concentration.

Using the partial pressures of the gases, we can write the reaction quotient for the system [latex]\text{C}_2\text{H}_6(g)\;{\rightleftharpoons}\;\text{C}_2\text{H}_4(g)\;+\;\text{H}_2(g)[/latex] by following the same guidelines for deriving concentration-based expressions:

[latex]Q_P = \frac{P_{\text{C}_2\text{H}_4}P_{\text{H}_2}}{P_{\text{C}_2\text{H}_6}}[/latex]

In this equation we use Q_P to indicate a reaction quotient written with partial pressures: [latex]P_{\text{C}_2\text{H}_6}[/latex] is the partial pressure of C₂H₆; [latex]P_{\text{H}_2}[/latex], the partial pressure of H₂; and [latex]P_{\text{C}_2\text{H}_6}[/latex], the partial pressure of C₂H₄. At equilibrium:

[latex]K_P = Q_P = \frac{P_{\text{C}_2\text{H}_4}P_{\text{H}_2}}{P_{\text{C}_2\text{H}_6}}[/latex]

The subscript P in the symbol K_P designates an equilibrium constant derived using partial pressures instead of concentrations. The equilibrium constant, K_P , is still a constant, but its numeric value may differ from the equilibrium constant found for the same reaction by using concentrations.

Conversion between a value for K_c , an equilibrium constant expressed in terms of concentrations, and a value for K_P , an equilibrium constant expressed in terms of pressures, is straightforward (a K or Q without a subscript could be either concentration or pressure).

The equation relating K_c and K_P is derived as follows. For the gas-phase reaction [latex]m\text{A}\;+\;n\text{B}\;{\rightleftharpoons}\;x\text{C}\;+\;y\text{D}[/latex]:

[latex]\begin{array}{r @{{}={}} l} K_P & \frac{(P_C)^x(P_D)^y}{(P_A)^m(P_B)^n} \\[0.5em] & \frac{([\text{C}]\;\times\;RT)^x([\text{D}]\;\times\;RT)^y}{([\text{A}]\;\times\;RT)^m([\text{B}]\;\times\;RT)^n} \\[0.5em] & \frac{[\text{C}]^x[\text{D}]^y}{[\text{A}]^m[\text{B}]^n}\;\times\;\frac{(RT)^{x+y}}{(RT)^{m+n}} \\[0.5em] & K_c(RT)^{(x+y)\;-\;(m+n)} \\[0.5em] & K_c(RT)^{{\Delta}n} \end{array}[/latex]

The relationship between K_c and K_P is

[latex]K_P = K_c(RT)^{{\Delta}n}[/latex]

In this equation, Δn is the difference between the sum of the coefficients of the gaseous products and the sum of the coefficients of the gaseous reactants in the reaction (the change in moles of gas between the reactants and the products). For the gas-phase reaction [latex]m\text{A}\;+\;n\text{B}\;{\leftrightharpoons}\;x\text{C}\;+\;y\text{D}[/latex], we have

[latex]{\Delta}n = (x\;+\;y)\;-\;(m\;+\;n)[/latex]

Example 4

Calculation of K_P
Write the equations for the conversion of K_c to K_P for each of the following reactions:

(a) [latex]\text{C}_2\text{H}_6(g)\;{\rightleftharpoons}\;\text{C}_2\text{H}_4(g)\;+\;\text{H}_2(g)[/latex]

(b) [latex]\text{CO}(g)\;+\;\text{H}_2\text{O}(g)\;{\rightleftharpoons}\;\text{CO}_2(g)\;+\;\text{H}_2(g)[/latex]

(c) [latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)[/latex]

(d) K_c is equal to 0.28 for the following reaction at 900 °C:

[latex]\text{CS}_2(g)\;+\;4\text{H}_2(g)\;{\rightleftharpoons}\;\text{CH}_4(g)\;+\;2\text{H}_2\text{S}(g)[/latex]

What is K_P at this temperature?

Solution
(a) Δn = (2) − (1) = 1

K_P = K_c (RT)^Δn = K_c (RT)¹ = K_c (RT)

(b) Δn = (2) − (2) = 0

K_P = K_c (RT)^Δn = K_c (RT)⁰ = K_c

(c) Δn = (2) − (1 + 3) = −2

K_P = K_c (RT)^Δn = K_c (RT)⁻² = [latex]\frac{K_c}{(RT)^2}[/latex]

(d) K_P = K_c (RT)^Δn = (0.28)[(0.0821)(1173)]⁻² = 3.0 × 10⁻⁵

Check Your Learning
Write the equations for the conversion of K_c to K_P for each of the following reactions, which occur in the gas phase:

(a) [latex]2\text{SO}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{SO}_3(g)[/latex]

(b) [latex]\text{N}_2\text{O}_4(g)\;{\rightleftharpoons}\;2\text{NO}_2(g)[/latex]

(c) [latex]\text{C}_3\text{H}_8(g)\;+\;5\text{O}_2(g)\;{\rightleftharpoons}\;3\text{CO}_2(g)\;+\;4\text{H}_2\text{O}(g)[/latex]

(d) At 227 °C, the following reaction has K_c = 0.0952:

[latex]\text{CH}_3\text{OH}(g)\;{\rightleftharpoons}\;\text{CO}(g)\;+\;2\text{H}_2(g)[/latex]

What would be the value of K_P at this temperature?

Answer:

(a) K_P = K_c (RT)⁻¹; (b) K_P = K_c (RT); (c) K_P = K_c (RT); (d) 160 or 1.6 × 10²

Heterogeneous Equilibria

A heterogeneous equilibrium is a system in which reactants and products are found in two or more phases. The phases may be any combination of solid, liquid, or gas phases, and solutions. When dealing with these equilibria, remember that solids and pure liquids do not appear in equilibrium constant expressions (the activities of pure solids, pure liquids, and solvents are 1).

Some heterogeneous equilibria involve chemical changes; for example:

[latex]\begin{array}{r @{{}\rightleftharpoons{}} ll} \text{PbCl}_2(s) & \text{Pb}^{2+}(aq)\;+\;2\text{Cl}^{-}(aq) & K_c = [\text{Pb}^{2+}][\text{Cl}^{-}]^2 \\[0.5em] \text{CaO}(s)\;+\;\text{CO}_2(g) & \text{CaCO}_3(s) & K_c = \frac{1}{[\text{CO}_2]} \\[0.5em] \text{C}(s)\;+\;2\text{S}(g) & \text{CS}_2(g) & K_c = \frac{[\text{CS}_2]}{[\text{S}]^2} \end{array}[/latex]

Other heterogeneous equilibria involve phase changes, for example, the evaporation of liquid bromine, as shown in the following equation:

[latex]\text{Br}_2(l)\;{\rightleftharpoons}\;\text{Br}_2(g)\;\;\;\;\;\;\;K_c = [\text{Br}_2][/latex]

We can write equations for reaction quotients of heterogeneous equilibria that involve gases, using partial pressures instead of concentrations. Two examples are:

[latex]\begin{array}{r @{{}\rightleftharpoons{}} ll} \text{CaO}(s)\;+\;\text{CO}_2(g) & \text{CaCO}_3(s) & K_P = \frac{1}{P_{\text{CO}_2}} \\[0.5em] \text{C}(s)\;+\;2\text{S}(g) & \text{CS}_2(g) & K_P = \frac{P_{\text{CS}_2}}{(P_{\text{S}})^2} \end{array}[/latex]

Key Concepts and Summary

For any reaction that is at equilibrium, the reaction quotient Q is equal to the equilibrium constant K for the reaction. If a reactant or product is a pure solid, a pure liquid, or the solvent in a dilute solution, the concentration of this component does not appear in the expression for the equilibrium constant. At equilibrium, the values of the concentrations of the reactants and products are constant. Their particular values may vary depending on conditions, but the value of the reaction quotient will always equal K (K_c when using concentrations or K_P when using partial pressures).

A homogeneous equilibrium is an equilibrium in which all components are in the same phase. A heterogeneous equilibrium is an equilibrium in which components are in two or more phases. We can decide whether a reaction is at equilibrium by comparing the reaction quotient with the equilibrium constant for the reaction.

Key Equations

• [latex]Q = \frac{[\text{C}]^x[\text{D}]^y}{[\text{A}]^m[\text{B}]^n}\;\;\;\;\;\;\;\text{where}\;m\text{A}\;+\;n\text{B}\;{\rightleftharpoons}\;x\text{C}\;+\;y\text{D}[/latex]
• [latex]Q_P = \frac{(P_C)^x(P_D)^y}{(P_A)^m(P_B)^n}\;\;\;\;\;\;\;\text{where}\;m\text{A}\;+\;n\text{B}\;{\rightleftharpoons}\;x\text{C}\;+\;y\text{D}[/latex]
• P = MRT
• K_P = K_c (RT)^Δn

Chemistry End of Chapter Exercises

1. Explain why there may be an infinite number of values for the reaction quotient of a reaction at a given temperature but there can be only one value for the equilibrium constant at that temperature.
2. Explain why an equilibrium between Br₂(l) and Br₂(g) would not be established if the container were not a closed vessel shown in Figure 4 in Chapter 13.1 Chemical Equilibria.
3. If you observe the following reaction at equilibrium, is it possible to tell whether the reaction started with pure NO₂ or with pure N₂O₄?
   [latex]2\text{NO}_2(g)\;{\rightleftharpoons}\;\text{N}_2\text{O}_4(g)[/latex]
4. Among the solubility rules previously discussed is the statement: All chlorides are soluble except Hg₂Cl₂, AgCl, PbCl₂, and CuCl.

   (a) Write the expression for the equilibrium constant for the reaction represented by the equation [latex]\text{AgCl}(s)\;{\rightleftharpoons}\;\text{Ag}^{+}(aq)\;+\;\text{Cl}^{-}(aq)[/latex]. Is K_c > 1, < 1, or ≈ 1? Explain your answer.

   (b) Write the expression for the equilibrium constant for the reaction represented by the equation [latex]\text{Pb}^{2+}(aq)\;+\;2\text{Cl}^{-}(aq)\;{\rightleftharpoons}\;\text{PbCl}_2(s)[/latex]. Is K_c > 1, < 1, or ≈ 1? Explain your answer.

5. Among the solubility rules previously discussed is the statement: Carbonates, phosphates, borates, and arsenates—except those of the ammonium ion and the alkali metals—are insoluble.

   (a) Write the expression for the equilibrium constant for the reaction represented by the equation [latex]\text{CaCO}_3(s)\;{\rightleftharpoons}\;\text{Ca}^{2+}(aq)\;+\;\text{CO}_3^{\;\;-}(aq)[/latex]. Is K_c > 1, < 1, or ≈ 1? Explain your answer.

   (b) Write the expression for the equilibrium constant for the reaction represented by the equation [latex]3\text{Ba}^{2+}(aq)\;+\;2\text{PO}_4^{\;\;3-}(aq)\;{\rightleftharpoons}\;\text{Ba}_3(\text{PO}_4)_2(s)[/latex]. Is K_c > 1, < 1, or ≈ 1? Explain your answer.

6. Benzene is one of the compounds used as octane enhancers in unleaded gasoline. It is manufactured by the catalytic conversion of acetylene to benzene: [latex]3\text{C}_2\text{H}_2(g)\;{\longrightarrow}\;\text{C}_6\text{H}_6(g)[/latex]. Which value of K_c would make this reaction most useful commercially? K_c ≈ 0.01, K_c ≈ 1, or K_c ≈ 10. Explain your answer.
7. Show that the complete chemical equation, the total ionic equation, and the net ionic equation for the reaction represented by the equation [latex]\text{KI}(aq)\;+\;\text{I}_2(aq)\;{\rightleftharpoons}\;\text{KI}_3(aq)[/latex] give the same expression for the reaction quotient. KI₃ is composed of the ions K⁺ and [latex]\text{I}_3^{\;\;-}[/latex].
8. For a titration to be effective, the reaction must be rapid and the yield of the reaction must essentially be 100%. Is K_c > 1, < 1, or ≈ 1 for a titration reaction?
9. For a precipitation reaction to be useful in a gravimetric analysis, the product of the reaction must be insoluble. Is K_c > 1, < 1, or ≈ 1 for a useful precipitation reaction?
10. Write the mathematical expression for the reaction quotient, Q_c , for each of the following reactions:

    (a) [latex]\text{CH}_4(g)\;+\;\text{Cl}_2(g)\;{\rightleftharpoons}\;\text{CH}_3\text{Cl}(g)\;+\;\text{HCl}(g)[/latex]

    (b) [latex]\text{N}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{NO}(g)[/latex]

    (c) [latex]2\text{SO}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{SO}_3(g)[/latex]

    (d) [latex]\text{BaSO}_3(s)\;{\rightleftharpoons}\;\text{BaO}(s)\;+\;\text{SO}_2(g)[/latex]

    (e) [latex]\text{P}_4(g)\;+\;5\text{O}_2(g)\;{\rightleftharpoons}\;\text{P}_4\text{O}_{10}(s)[/latex]

    (f) [latex]\text{Br}_2(g)\;{\rightleftharpoons}\;2\text{Br}(g)[/latex]

    (g) [latex]\text{CH}_4(g)\;+\;2\text{O}_2(g)\;{\rightleftharpoons}\;\text{CO}_2(g)\;+\;2\text{H}_2\text{O}(l)[/latex]

    (h) [latex]\text{CuSO}_4{\cdot}5\text{H}_2\text{O}(s)\;{\rightleftharpoons}\;\text{CuSO}_4(s)\;+\;5\text{H}_2\text{O}(g)[/latex]

11. Write the mathematical expression for the reaction quotient, Q_c , for each of the following reactions:

    (a) [latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)[/latex]

    (b) [latex]4\text{NH}_3(g)\;+\;5\text{O}_2(g)\;{\rightleftharpoons}\;4\text{NO}(g)\;+\;6\text{H}_2\text{O}(g)[/latex]

    (c) [latex]\text{N}_2\text{O}_4(g)\;{\rightleftharpoons}\;2\text{NO}_2(g)[/latex]

    (d) [latex]\text{CO}_2(g)\;+\;\text{H}_2(g)\;{\rightleftharpoons}\;\text{CO}(g)\;+\;\text{H}_2\text{O}(g)[/latex]

    (e) [latex]\text{NH}_4\text{Cl}(s)\;{\rightleftharpoons}\;\text{NH}_3(g)\;+\;\text{HCl}(g)[/latex]

    (f) [latex]2\text{Pb(NO}_3)_2(s)\;{\rightleftharpoons}\;2\text{PbO}(s)\;+\;4\text{NO}_2(g)\;+\;\text{O}_2(g)[/latex]

    (g) [latex]2\text{H}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{H}_2\text{O}(l)[/latex]

    (h) [latex]\text{S}_8(g)\;{\rightleftharpoons}\;8\text{S}(g)[/latex]

12. The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.

    (a) [latex]2\text{NH}_3(g)\;{\rightleftharpoons}\;\text{N}_2(g)\;+\;3\text{H}_2(g)\;\;\;\;\;\;\;K_c = 17[/latex]; [NH₃] = 0.20 M, [N₂] = 1.00 M, [H₂] = 1.00 M

    (b) [latex]2\text{NH}_3(g)\;{\rightleftharpoons}\;\text{N}_2(g)\;+\;3\text{H}_2(g)\;\;\;\;\;\;\;K_P = 6.8\;\times\;10^4[/latex]; initial pressures: NH₃ = 3.0 atm, N₂ = 2.0 atm, H₂ = 1.0 atm

    (c) [latex]2\text{SO}_3(g)\;{\rightleftharpoons}\;2\text{SO}_2(g)\;+\;\text{O}_2(g)\;\;\;\;\;\;\;K_c = 0.230[/latex]; [SO₃] = 0.00 M, [SO₂] = 1.00 M, [O₂] = 1.00 M

    (d) [latex]2\text{SO}_3(g)\;{\rightleftharpoons}\;2\text{SO}_2(g)\;+\;\text{O}_2(g)\;\;\;\;\;\;\;K_P = 16.5[/latex]; initial pressures: SO₃ = 1.00 atm, SO₂ = 1.00 atm, O₂ = 1.00 atm

    (e) [latex]2\text{NO}(g)\;+\;\text{Cl}_2(g)\;{\rightleftharpoons}\;2\text{NOCl}(g)\;\;\;\;\;\;\;K_c = 4.6\;\times\;10^4[/latex]; [NO] = 1.00 M, [Cl₂] = 1.00 M, [NOCl] = 0 M

    (f) [latex]\text{N}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{NO}(g)\;\;\;\;\;\;\;K_P = 0.050[/latex]; initial pressures: NO = 10.0 atm, N₂ = O₂ = 5 atm

13. The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.

    (a) [latex]2\text{NH}_3(g)\;{\rightleftharpoons}\;\text{N}_2(g)\;+\;3\text{H}_2(g)\;\;\;\;\;\;\;K_c = 17[/latex]; [NH₃] = 0.50 M, [N₂] = 0.15 M, [H₂] = 0.12 M

    (b) [latex]2\text{NH}_3(g)\;{\rightleftharpoons}\;\text{N}_2(g)\;+\;3\text{H}_2(g)\;\;\;\;\;\;\;K_P = 6.8\;\times\;10^4[/latex]; initial pressures: NH₃ = 2.00 atm, N₂ = 10.00 atm, H₂ = 10.00 atm

    (c) [latex]2\text{SO}_3(g)\;{\rightleftharpoons}\;2\text{SO}_2(g)\;+\;\text{O}_2(g)\;\;\;\;\;\;\;K_c = 0.230[/latex]; [SO₃] = 2.00 M, [SO₂] = 2.00 M, [O₂] = 2.00 M

    (d) [latex]2\text{SO}_3(g)\;{\rightleftharpoons}\;2\text{SO}_2(g)\;+\;\text{O}_2(g)\;\;\;\;\;\;\;K_P = 6.5\;\text{atm}[/latex]; initial pressures: SO₂ = 1.00 atm, O₂ = 1.130 atm, SO₃ = 0 atm

    (e) [latex]2\text{NO}(g)\;+\;\text{Cl}_2(g)\;{\rightleftharpoons}\;2\text{NOCl}(g)\;\;\;\;\;\;\;K_P = 2.5\;\times\;10^3[/latex]; initial pressures: NO = 1.00 atm, Cl₂ = 1.00 atm, NOCl = 0 atm

    (f) [latex]\text{N}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{NO}(g)\;\;\;\;\;\;\;K_c = 0.050[/latex]; [N₂] = 0.100 M, [O₂] = 0.200 M, [NO] = 1.00 M

14. The following reaction has K_P = 4.50 × 10⁻⁵ at 720 K.
    [latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)[/latex]

    If a reaction vessel is filled with each gas to the partial pressures listed, in which direction will it shift to reach equilibrium? P(NH₃) = 93 atm, P(N₂) = 48 atm, and P(H₂) = 52

15. Determine if the following system is at equilibrium. If not, in which direction will the system need to shift to reach equilibrium?
    [latex]\text{SO}_2\text{Cl}_2(g)\;{\rightleftharpoons}\;\text{SO}_2(g)\;+\;\text{Cl}_2(g)[/latex]

    [SO₂Cl₂] = 0.12 M, [Cl₂] = 0.16 M and [SO₂] = 0.050 M. K_c for the reaction is 0.078.

16. Which of the systems described in Chapter 13.2 Chemistry End of Chapter Exercise 10 give homogeneous equilibria? Which give heterogeneous equilibria?
17. Which of the systems described in Chapter 13.2 Chemistry End of Chapter Exercise 11 give homogeneous equilibria? Which give heterogeneous equilibria?
18. For which of the reactions in Chapter 13.2 Chemistry End of Chapter Exercise 10 does K_c (calculated using concentrations) equal K_P (calculated using pressures)?
19. For which of the reactions in Chapter 13.2 Chemistry End of Chapter Exercise 11 does K_c (calculated using concentrations) equal K_P (calculated using pressures)?
20. Convert the values of K_c to values of K_P or the values of K_P to values of K_c .

    (a) [latex]\text{N}_2(g)\;+\;3\text{H}_2(g)\;{\rightleftharpoons}\;2\text{NH}_3(g)\;\;\;\;\;\;\;K_c = 0.50\;\text{at}\;400\;^{\circ}\text{C}[/latex]

    (b) [latex]\text{H}_2\;+\;\text{I}_2\;{\rightleftharpoons}\;2\text{HI}\;\;\;\;\;\;\;K_c = 50.2\;\text{at}\;448\;^{\circ}\text{C}[/latex]

    (c) [latex]\text{Na}_2\text{SO}_4{\cdot}10\text{H}_2\text{O}(s)\;{\rightleftharpoons}\;\text{Na}_2\text{SO}_4(s)\;+\;10\text{H}_2\text{O}(g)\;\;\;\;\;\;\;K_P = 4.08\;\times\;10^{-25}\;\text{at}\;25\;^{\circ}\text{C}[/latex]

    (d) [latex]\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{H}_2\text{O}(g)\;\;\;\;\;\;\;K_P = 0.122\;\text{at}\;50\;^{\circ}\text{C}[/latex]

21. Convert the values of K_c to values of K_P or the values of K_P to values of K_c .

    (a) [latex]\text{Cl}_2(g)\;+\;\text{Br}_2(g)\;{\rightleftharpoons}\;2\text{BrCl}(g)\;\;\;\;\;\;\;K_c = 4.7\;\times\;10^{-2}\;\text{at}\;25\;^{\circ}\text{C}[/latex]

    (b) [latex]2\text{SO}_2(g)\;+\;\text{O}_2(g)\;{\rightleftharpoons}\;2\text{SO}_3(g)\;\;\;\;\;\;\;K_P = 48.2\;\text{at}\;500\;^{\circ}\text{C}[/latex]

    (c) [latex]\text{CaCl}_2{\cdot}6\text{H}_2\text{O}(s)\;{\rightleftharpoons}\;\text{CaCl}_2(s)\;+\;6\text{H}_2\text{O}(g)\;\;\;\;\;\;\;K_P = 5.09\;\times\;10^{-44}\;\text{at}\;25\;^{\circ}\text{C}[/latex]

    (d) [latex]\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{H}_2\text{O}(g)\;\;\;\;\;\;\;K_P = 0.196\;\text{at}\;60\;^{\circ}\text{C}[/latex]

22. What is the value of the equilibrium constant expression for the change [latex]\text{H}_2\text{O}(l)\;{\rightleftharpoons}\;\text{H}_2\text{O}(g)[/latex] at 30 °C?
23. Write the expression of the reaction quotient for the ionization of HOCN in water.
24. Write the reaction quotient expression for the ionization of NH₃ in water.
25. What is the approximate value of the equilibrium constant K_P for the change [latex]\text{C}_2\text{H}_5\text{OC}_2\text{H}_5(l)\;{\rightleftharpoons}\;\text{C}_2\text{H}_5\text{OC}_2\text{H}_5(g)[/latex] at 25 °C. (Vapor pressure was described in the previous chapter on liquids and solids; refer back to this chapter to find the relevant information needed to solve this problem.)

Glossary

equilibrium constant (K)

value of the reaction quotient for a system at equilibrium

heterogeneous equilibria

equilibria between reactants and products in different phases

homogeneous equilibria

equilibria within a single phase

K_c

equilibrium constant for reactions based on concentrations of reactants and products

K_P

equilibrium constant for gas-phase reactions based on partial pressures of reactants and products

law of mass action

when a reversible reaction has attained equilibrium at a given temperature, the reaction quotient remains constant

reaction quotient (Q)

ratio of the product of molar concentrations (or pressures) of the products to that of the reactants, each concentration (or pressure) being raised to the power equal to the coefficient in the equation

Solutions

Answers to Chemistry End of Chapter Exercises

2. Equilibrium cannot be established between the liquid and the gas phase if the top is removed from the bottle because the system is not closed; one of the components of the equilibrium, the Br₂ vapor, would escape from the bottle until all liquid disappeared. Thus, more liquid would evaporate than can condense back from the gas phase to the liquid phase.

4. (a) K_c = [Ag⁺][Cl⁻] < 1. AgCl is insoluble; thus, the concentrations of ions are much less than 1 M; (b) [latex]K_c = \frac{1}{[\text{Pb}^{2+}][\text{Cl}^{-}]^2}\;{\textgreater}\;1[/latex] because PbCl₂ is insoluble and formation of the solid will reduce the concentration of ions to a low level (<1 M).

6. Since [latex]K_c = \frac{[\text{C}_6\text{H}_6]}{[\text{C}_2\text{H}_2]^3}[/latex], a value of K_c ≈ 10 means that C₆H₆ predominates over C₂H₂. In such a case, the reaction would be commercially feasible if the rate to equilibrium is suitable.

8. K_c > 1

10. (a) [latex]Q_c = \frac{[\text{CH}_3\text{Cl}][\text{HCl}]}{[\text{CH}_4][\text{Cl}_2]}[/latex]; (b) [latex]Q_c = \frac{[\text{NO}]^2}{[\text{N}_2][\text{O}_2]}[/latex]; (c) [latex]Q_c = \frac{[\text{SO}_3]^2}{[\text{SO}_2]^2[\text{O}_2]}[/latex]; (d) [latex]Q_c = [\text{SO}_2][/latex]; (e) [latex]Q_c = \frac{1}{[\text{P}_4][\text{O}_2]^5}[/latex]; (f) [latex]Q_c = \frac{[\text{Br}]^2}{[\text{Br}_2]}[/latex]; (g) [latex]Q_c = \frac{[\text{CO}_2]}{[\text{CH}_4][\text{O}_2]^2}[/latex]; (h) [latex]Q_c = [\text{H}_2\text{O}]^5[/latex]

12. (a) Q _c 25 proceeds left; (b) Q_P 0.22 proceeds right; (c) Q_c undefined proceeds left; (d) Q_P 1.00 proceeds right; (e) Q_P 0 proceeds right; (f) Q_c 4 proceeds left

14. The system will shift toward the reactants to reach equilibrium.

16. (a) homogenous; (b) homogenous; (c) homogenous; (d) heterogeneous; (e) heterogeneous; (f) homogenous; (g) heterogeneous; (h) heterogeneous

18. This situation occurs in (a) and (b).

20. (a) K_P = 1.6 × 10⁻⁴; (b) K_P = 50.2; (c) K_c = 5.31 × 10⁻³⁹; (d) K_c = 4.60 × 10⁻³

22. [latex]K_P = P_{\text{H}_2\text{O}} = 0.042[/latex].

24. [latex]Q_c = \frac{[\text{NH}_4^{\;\;+}][\text{OH}^{-}]}{[\text{HN}_3]}[/latex]

Write the Equilibrium Constant Expression Kc for the Following Reaction. $$

Source: https://opentextbc.ca/chemistry/chapter/13-2-equilibrium-constants/

Share this post